HP Enterprise CP5525 manual Paper-path sensors test, Output-bin-full sensor PS10

Output-bin-full sensor (PS10)

1.Locate the output-bin-full sensor flag (callout 1), and then activate the sensor flag. Figure 3-24Test the output-bin-full sensor

1

2.Check the control-panel display for sensor response.

3.If there is no response, examine the flag at the left end of the output bin full sensor flag. If the flag is broken, replace the paper delivery assembly. If the flag is not broken, replace the fuser gear assembly.

Paper-path sensors test

This test displays the status of each paper-path sensor and allows viewing of sensor status while printing internal pages.

1.Press the Home button.

2.Open the following menus:

●Administration

●Troubleshooting

●Diagnostic Tests

3.Press the Down arrow to highlight the Paper Path Sensors option, and then press the OK button.

4.Select Start Test. Press the down arrow to see the test results.

ENWW Tools for troubleshooting 313