HP Enterprise CP5525 manual USB Firmware Upgrade menu, 44Calibration/Cleaning menu

Table 3-44Calibration/Cleaning menu (continued)

First level	Second level	Values	Description
Full Calibration			Performs all product calibrations.

Delay Calibration at	Disabled
Wake/Power On	Enabled*

This menu controls the timing of the calibration when the product wakes up or is turned on.

Select No to have the product calibrate immediately when it wakes up or is turned on. The product will not print any jobs until it finishes calibrating.

Select Yes to enable a product that is asleep to accept print jobs before it calibrates. It may start calibrating before it has printed all the jobs it has received. This option allows quicker printing when coming out of sleep mode or when you turn the product on, but print quality might be reduced.

For best results, allow the product to calibrate before printing. Print jobs performed before calibration might not be of the highest quality.

USB Firmware Upgrade menu

To display: At the product control panel, select the Device Maintenance menu, and then select the USB Firmware Upgrade menu.

Insert a USB storage device with a firmware upgrade bundle into the USB port, and follow the on- screen instructions.

408 Chapter 3 Solve problems ENWW