Status
Displays the status of the projector.
1. Press ▲▼ to select “STATUS”.
| REMOTE2 MODE | DEFAULT |
|
|
| STATUS |
|
|
|
| AIR FILTER CLEANING |
|
|
|
2.Press ENTER.
• The “STATUS” screen will be displayed.
| STATUS |
| 1/3 |
| |
| INPUT | RGB2 |
|
| |
| NAME |
|
| ||
| SIGNAL FREQUENCY | 48.36kHz/59.99Hz |
|
| |
| PROJECTOR RUNTIME | 76h |
|
| |
| LAMP1 | 341h | / ON / |
|
|
| LAMP2 | 334h | / ON / |
|
|
| LAMP3 | 342h | / ON / |
|
|
| LAMP4 | 97h / ON / |
|
| |
| INTAKE AIR TEMP. | 31°C/87°F |
|
| |
| OPTICS MODULE TEMP. | 27°C/80°F |
|
| |
| AROUND LAMP TEMP. | 31°C/87°F |
|
| |
| REMOTE2 STATUS | DISABLE |
|
| |
|
|
|
|
|
|
3. Press ◄► to move to the next page.
| STATUS | 2/3 |
| |
|
|
|
|
|
| PROJECTOR MODEL | DW100 |
|
|
| SERIAL NUMBER | SWXXXXX |
|
|
| MAIN VERSION | 1.00 |
|
|
| SUB VERSION | 1.00 |
|
|
| NETWORK VERSION | 1.00 |
|
|
|
|
|
|
|
4. Press ◄► to move to the next page.
| STATUS |
| 3/3 | |
| ON COUNT |
|
|
|
| POWER ON TIMES |
| 8 |
|
| LAMP1 ON |
| 362 |
|
| LAMP2 ON |
| 363 |
|
| LAMP3 ON |
| 366 |
|
| LAMP4 ON |
| 116 |
|
| SHUTTER | 6( | 0) |
|
| AIR FILTER CLEANING | 1( | 0) |
|
| AUX | MD77SD1:SN |
| |
| NUMBER OF ENTRY SIGNAL | 0/96 |
| |
| AC VOLTAGE | NORMAL |
| |
|
|
|
|
|
•INPUT:
Displays the input selection state.
•NAME:
Displays the input signal name.
•SIGNAL FREQUENCY:
Displays the frequency of the input signal.
•PROJECTOR RUNTIME: Displays the projector runtime.
•LAMP1:
Displays the lighting time of LAMP1.
•LAMP2:
Displays the lighting time of LAMP2.
•LAMP3:
Displays the lighting time of LAMP3.
•LAMP4:
Displays the lighting time of LAMP4.
•INTAKE AIR TEMP:
Displays the intake air temperature of the projector.
•OPTICS MODULE TEMP.:
Displays the temperature inside the projector.
•AROUND LAMP TEMP.:
Displays the temperature around the lamp of the projector.
•REMOTE2 STATUS:
Displays the control status of REMOTE2.
•PROJECTOR MODEL: Displays the type of projector.
•SERIAL NUMBER:
Displays the serial number of the projector.
•MAIN VERSION:
Displays the main version of the firmware of the projector unit.
•SUB VERSION:
Displays the sub version of the firmware of the projector unit.
•NETWORK VERSION:
Displays the network version of the projector unit.
•ON COUNT:
POWER ON TIMES:
Displays the number of times the power has been turned on.
LAMP1 ON:
Displays the number of times LAMP1 has been lit.
LAMP2 ON:
Displays the number of times LAMP2 has been lit.
LAMP3 ON:
Displays the number of times LAMP3 has been lit.
LAMP4 ON:
Displays the number of times LAMP4 has been lit.
SHUTTER:
Displays the number of times the shutter function has been used.
AIR FILTER CLEANING:
Displays the number of times the air filter has been cleaned.
•AUX:
Displays the name of the optional input module inserted in the input module.
•NUMBER OF ENTRY SIGNAL:
Displays the number of registered signals.
•AC VOLTAGE:
Displays the AC voltage state.
Cleaning the air filter
This can be used to set air filter cleaning.
1. Press ▲▼ to select “AIR FILTER CLEANING”.
STATUS |
|
AIR FILTER CLEANING |
|
AUTO POWER OFF | DISABLE |
Special Features
