Panasonic PT-DW100U operating instructions Adjustment range after lens position optical shift

Adjustment range after lens position (optical shift)

Do not move the lens beyond the bounds of the shift range as this may cause a change in the focus. This limitation is to protect the parts of the projector.

Using the standard projection position as the reference, the optical axis shift function makes it possible to adjust the projection position in the ranges shown in the figures below.

Model number of projection lens
	0.20V	0.20V	0.60V
	V
	Projected screen height,	Standard
ET-D75LE6		projection position
		20V.0	0.60V
	0.20V
Lens	0.20H	0.20H
	Projected screen
		width, H
Zoom
	0.20V
		0.20V	0.70V
	V
ET-D75LE1	Projected screen height,	Standard
ET-D75LE2
		projection position
ET-D75LE3
ET-D75LE4			0.70V
ET-D75LE8		20V.0
	0.20V
	0.3H	0.3H
		Projected screen
		width, H
Note

• The ET-D75LE5 has a fixed focal point, and so shift adjustment cannot be carried out.

Moving the projection lens position to the home position

1. Press and hold LENS on the projector’s controls or SHIFT on the remote control for 3 seconds or more.

LENS

SHIFT

ENTER EXECUTE

MENU CANCEL

2.Press ENTER while the menu shown above is being displayed. (It will be displayed for about 5 seconds.)

• “PROGRESS...” will appear in the menu, and the projection lens will move to the home position.

Note

•The home position for the projection lens is the lens position when the lens is being replaced or when the projector is being stored away, and it is not the optical center of the screen.

Basic Operation

ENGLISH – 39