Registration of input signal data
MENU
▲▼◄►
ENTER
DEFAULT
The input signal data must be registered because it is not registered on shipment of the projector.
MENU | Press to display the MAIN | |
|
| MENU screen. |
Press to select “SIGNAL |
LIST”. |
Press to display the
“REGISTERED SIGNAL LIST” menu.
•The memories extend over 12 pages (A to L with 8 data items each, giving a total of 96 memories).
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
ENTER SUB MENU
Registration of new data
When a new format input signal is applied to the projector, press MENU on the remote control or operating section of the main unit. When its data has been registered, the “MAIN MENU” screen is displayed.
Note
•The data of 96 input signals can be registered in the projector’s memory.
•Signals appropriate to the optional input cards will also be registered in the memories as they are input.
•The 96 memories are numbered over 12 pages (A to L: 8 data items can be registered on each page), and the data is registered in the unused memory location with the lowest number. If all the memories are filled, the data of the old signals is overwritten in sequence.
•The names of the registered data are automatically determined according to the type of signal and the available memory number, but they can be renamed as described below.
•If a menu is being displayed, the new signals will be registered at the instant they are input.
Renaming the registered signals
1.Press ▲▼◄ ► to select the signal whose details are to be
displayed.
REGISTERED SIGNAL LIST
RGB1 | −−− |
| |
RGB1 | −−− |
| |
RGB1 | −−− |
| |
| |||
|
|
|
|
2.Press ENTER.
•The “REGISTERED SIGNAL STATUS” screen will be displayed.
REGISTERED SIGNAL STATUS
NAME |
| |
MEMORY NO | A2 |
|
INPUT | RGB1 |
|
fH | 48.08kHz |
|
fV | 72.17Hz |
|
SYNC.STATE | H(POS) |
|
| V(POS) |
|
|
|
|
•The data items including the input signal name, memory number, input terminal, frequency and sync signal are automatically identified and displayed.
•When MENU is pressed, the “REGISTERED SIGNAL LIST” screen is restored.
3.Press ENTER.
•The “RENAME” screen will be displayed.
Basic Operation
