Projection
Power indicator lamp
Lock Button
Power indicator lamp
This shows the power supply status. Make sure that you fully understand the operation of the power indicator lamp before operating the projector.
Indicator | Projector status | ||
status |
| ||
|
| ||
Off |
| Main power is off | |
|
|
| Standby mode |
Red |
| Lit | POWER ON ( ) button can be pressed |
|
|
| so that images can be projected. |
|
|
|
|
Green |
| Lit | Images are being projected (on) |
|
|
| Cooling mode |
Orange |
| Lit | After a short while, the projector will |
|
|
| switch to standby mode. |
|
|
|
|
Attention
•While the projector is in cooling mode (when the power indicator lamp is lit orange), the internal fan is running to cool down the projector. Do not turn off the MAIN POWER switch or disconnect the power cord at this time.
Connecting the power
cord
Insert the accessory power cord securely into the projector and the electrical outlet.
Be sure to read the “IMPORTANT SAFETY NOTICE” (pp.
Installation
1.Check the shape of the AC IN terminal on the side of the projector and the shape of the power cord connector, and insert the power cord securely into the AC IN terminal.
2.Insert the power cord plug into an electrical outlet.
Removal
Basic Operation
Note
•If the POWER ON “ ” button is pressed while the projector is still in cooling mode, it may take some time before the projector is ready to project pictures.
1.Check that the MAIN POWER
switch on the projector is at the OFF “○” position, and then disconnect the power cord plug from the electrical outlet.
2.Remove the power cord from the AC IN terminal while pressing the lock button on the power cord connector.
Attention
•Connect all peripheral equipment to the projector before connecting the projector’s power cord. (pp.
