Adjust clock page
Click [Detailed set up], then [Adjust clock] to display the Adjust clock page.
Time zone selection
Button to update time zone setting |
New date field
New time field
Button to update time and date settings
Note
•If the time becomes incorrect immediately after setting the correct time, then the battery needs to be changed. Contact the dealer where you bought the projector to have the battery changed.
Network config page
Click [Detailed set up], then [Network config] to display the Network config page.
Set this to ON to enable the DHCP client function.
Enter the IP address if DHCP server is not used.
Enter the net mask if DHCP server is not used.
Enter the gateway address if DHCP server is not used.
DNS server address (primary) field Available input characters: Numeric characters
DNS server address (secondary) field
Available input characters:
Numeric characters
Enter the port number here. Number 80 is normally used.
Enter the name of the projector here. Enter the host name here if it is required when the DHCP server is going to be used, for instance.
Button to update settings
Special Features
