Side | Top |
u
t
Bottom
v
Getting Started
lAUTO SET UP button・・・・・・・・・・・・・・・・・・ (p. 47) Pressing this button while projecting an image automatically corrects the picture positioning
on the screen. While the auto setup feature is active, a message “PROGRESS...” appears on the screen.
mSHUTTER button ・・・・・・・・・・・・・・・・・・・・・ (p. 46) Pressing this button toggles the projector’s internal mechanical shutter to black out the projected image.
nASPECT button ・・・・・・・・・・・・・・・・・・・・・・・ (p. 48) Toggles through the aspect ratio settings appropriate for the current input signal.
oLENS (FOCUS, ZOOM, SHIFT) button・・・ (p. 38) These buttons are used together with the arrow keys to adjust the projection lens.
pFunction 1 (FUNC1) button ・・・・・・・・・・・・ (p. 47) This button function can be assigned on the “FUNC1” line of the “PROJECTOR SETUP” page, found on the Main Menu page.
qDEFAULT button ・・・・・・・・・・・・・・・・・・・・・・ (p. 51) Press this button when you want to restore the setting of the item selected in the menu to the factory default value.
rID SET button ・・・・・・・・・・・・・・・・・・・・ (pp. 18, 75) When two or more main units are used in the system, this button specifies the ID of the remote control.
sID ALL button・・・・・・・・・・・・・・・・・・・・・ (pp. 18, 75) When two or more projectors are used in the system, this button allows all projectors to
be controlled regardless of their current ID assignments.
tLOCK button
This switch locks the remote to prevent unintended operation and to prevent the batteries from becoming spent during shipment.
uRemote control transmitter window
Operate the remote control aiming at the remote control receiver window on the main unit.
vRemote control wired terminal・・・・・・・・・ (p. 18) To use the wired output terminal, connect the remote control and the main unit with the cable (sold separately).
Note
•The AUX input select button is enabled only when an optional input module is installed.