Location and function of each part (continued)
Projector Main Unit
Front |
| Rear |
|
1 2 | 3 4 5 6 | n | o |
7 8 9 j k l m | p q | r s | |
1Projection lens cover･･････････････････ (p. 34)
2Projection lens (optional)
Lens for projecting images on the screen.
3Remote control receiver window (front)
･･････････････････････････････････････ (p. 17) This window receives the signal beam emitted from the remote control.
4LAMP (LAMP1, LAMP2, LAMP3, LAMP4) monitor ･････････････････････････････ (p. 109) These LEDS indicate the status of each lamp - GREEN for “In Use”, RED for
5Temperature monitor (TEMP) ･････････ (p. 109) These LEDs illuminate and flash to indicate lamp warmup intervals, abnormal internal temperatures, or cooling fan errors.
6Power indicator lamp ･････････････････ (p. 35) The lamp lights in red when the MAIN POWER switch is turned to “ l ”. It turns to green when the POWER ON button of the remote control or the main unit is pressed.
7Air intake vents
During installation, ensure adequate airflow to these vents.
8Burglar hook
Attach a commercial burglar prevention cable to this hook port.
9Adjustable feet ･･･････････････････････ (p. 20) Use these feet to adjust the tilt of the projector. (Adjustable feet are provided at the front and rear, right and left.)
jProjection lens cover lock button ･･････ (p. 34) Press these side buttons to unlock the lens cowling, pulling it forward to remove. Centering the lens first may ease removal.
kAir filter ･････････････････････････････ (p. 110)
lAir filter cleaning monitor･････････ (pp. 79, 110) This blinks blue while the air filter is being cleaned. It lights red when there is a problem with the air filter.
mFilter cleaning unit fixing screw ･･･････ (p. 110) This is used to secure the air filter cover.
nAir exhaust vents
Hot air comes out of the air exhaust vents.
oLamp unit cover screw ･･･････････････ (p. 113) This is used to secure the lamp unit cover.
pRemote control receiver window (rear) ･ (p. 17) This also receives the signal beam coming from the remote control.
qRemote control receiver window (bottom)
･･････････････････････････････････････ (p. 17) This also receives the signal beam coming from the remote control.
rAir intake vents
During installation, ensure adequate airflow to these vents.
sLamp unit cover ･････････････････････ (p. 113) This hinged panel swings down for lamp replacement.
