Adjusting the picture
MENU
▲▼◄►
ENTER
DEFAULT
You can adjust pictures to suit your preference.
MENU | Press to display the MAIN | |
|
| MENU screen. |
Press to select |
“PICTURE”. |
Press to display the “PICTURE” menu.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
ENTER SUB MENU
•Some menu items may not be valid for certain signal formats applied to the projector.
52 – ENGLISH
Switching the picture mode
The user can switch to the desired picture mode suitable for the image source and the environment in which this projector is used.
1. Press ▲▼ to select “PICTURE MODE”.
PICTURE
PICTURE MODE | STANDARD |
| |
CONTRAST | 0 |
|
|
|
|
|
|
2.Press ◄► to switch “PICTURE MODE”.
•The setting will change as follows each time ◄► is pressed.
STANDARD 
CINEMA 
NATURAL
USER 
GRAPHIC 
DYNAMIC
•STANDARD:
The picture becomes suitable for moving images in general.
•CINEMA:
The picture becomes suitable for movie sources.
•NATURAL:
The picture complies with sRGB.
•DYNAMIC:
The light output is maximized for use in bright areas.
•GRAPHIC:
The picture becomes suitable for input from to the personal computer.
•USER:
The COLOR TEMPERATURE and GAMMA settings can be adjusted.
Note
•Factory defaults are “GRAPHIC” for RGB system and “STANDARD” for moving images.
•When ENTER is pressed while “PICTURE MODE” has been selected, the current Picture Mode page settings are saved and will be used as the presets when new signals are input. The data will be saved for all items in the PICTURE menu except for the SYSTEM SELECTOR setting.
Adjusting Contrast
Adjusts the Contrast (white level).
1. Press ▲▼ to select “CONTRAST”.
| PICTURE MODE | STANDARD |
|
| |
| CONTRAST | 0 |
|
|
|
| BRIGHTNESS | 0 |
|
|
|
|
|
|
|
|
|
