How to use network functions (continued)
Firmware update page
(The firmware should be updated only by an individual with the specialized knowledge required to do this.)
Enter here the filename of the firmware to be updated.
After entering the filename, press the [Upload] button. Data transfer is now commenced.
It will require several minutes for the data to be transferred.
The time taken will differ depending on the network conditions.
Displays the current version.
Displays the updated version.
Check the updated version against the current version, and if everything is in order, press the [OK] button. Version data rewriting is now commenced.
Do not turn off the power while the version data is being rewritten.
Messages such as the ones shown below appear during data rewriting.
The following message appears upon completion of the version data rewriting.
