Installation (continued)
Installation dimensions diagram
Figure 1 : Dimensions applying when | Figure 2 : Dimensions applying when | Figure 3 : Maximum rotation | |||||||||||||||
one unit is used | two units are used) |
|
| allowable | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
more | Exhaust | 50 cm (19.7˝) |
|
| +15° | +15° | |
| 50 cm (19.7˝) | +15° | +15° | ||||
| or more | Exhaust | or more | 50 cm (19.7˝) |
| ||
or |
|
|
|
| or more |
| |
| cm (11.8˝) |
|
|
|
| ||
cm (11.8˝) |
| more | 50 cm (19.7˝) | 40 cm (15.7˝) |
| ||
30 |
| 30 | or | or more |
| or more |
|
|
|
|
| Exhaust | 10 cm (3.9˝) or more |
| |
|
|
|
|
|
| ||
| 40 cm (15.7˝) |
|
|
|
| ||
| or more |
|
|
|
|
| |
Attention
•Leave a space of 50 cm (19.7˝) or more behind the projector for replacing the lamp and ensuring the air exhaust vents are not blocked.
•Set up the projector so that air can flow freely around the rear of the projector. In addition, leave a space of
30 cm (11.8˝) or more at the sides so that the hot air coming out from the air outlet vents does not get drawn in through the air intake vents.
•Set up the projector with a space of 40 cm or more at the front so that the air filter can be replaced.
•When the projector is to be placed inside a box and used, ensure the structure has a duct or the like to discharge air from the box, leave the clearances shown in Fig. 2, and ensure the temperature during operation remains within the 0 °C to 35 °C range.
