Vidikron 40828 manual Operation, Available Range of the Remote Control

Installation

Notes on Remote Control	➤	The remote control can be used to control the projector within the ranges shown in Figure
Operation		3-1.

30°

23'(7 m) 45°

45°

23'(7 m)

30°

Figure 3-1. Available Range of the Remote Control

The signal from the remote control can be reflected by the screen.

Note

•For best results, hold the remote control within 23 feet (7m) of the back or top sensor and aligned within 30°.

•Do not drop the remote control or expose it to moisture or high temperature.

•The remote control may malfunction under a fluorescent lamp. If that occurs, move the projector away from the fluorescent lamp.

•Make sure that there is nothing obstructing the infrared beam between the remote control and the IR receiver on the projector.

•If the effective range of the remote control decreases, or it stops working, replace the batteries with new ones.

•Ambient conditions may possibly impede the operation of the remote control. If this

happens, point the remote control at the projector, and repeat the operation.

14 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual