Vidikron 40828 manual 7Specifications, Vision 10/12 Specifications

7Specifications

Table 7-1lists the Vision 10/12 specifications.			7.1
Table 7-1. Vision 10/12 Specifications			Vision 10/12 Specifications
Projector Type:	Digital Light Processing (DLP), single-chip DMD
Native Resolution:	Vision Model 10: 1024 x 576 (16:9)
	Vision Model 12: 1280 x 720 (16:9)
Aspect Ratios:	4:3, Letterbox, 16:9 Anamorphic, IntelliWide, Cinema,
	Cinema Fill
Video Standards:	NTSC, PAL, SECAM
Scan Frequency:	Horizontal: 15 to 80 kHz
	Vertical: 43 to 100 Hz
Picture Size (16:9 Screen):	Recommended Width: 72 to 96 in.
	Maximum Width: 150 in.
Throw Distance	Vision Model 10:
(Factor x Screen Width):	Minimum: Screen Width x 1.40
	Maximum: Screen Width x 1.60
	Vision Model 12:
	Minimum: Screen Width x 1.42
	Maximum: Screen Width x 1.65
Horizontal and Vertical Offset:	Vision Model 10:
	Horizontal -- 8% of screen width left or right
	Vertical (when ceiling-mounted) --
		60% of screen height below;
		40% of screen height above
	Vertical (when floor-mounted) --
		40% of screen height below;
		60% of screen height above
	Vision Model 12:
	Horizontal -- 8% of screen width left or right
	Vertical (when ceiling-mounted) --
		63% of screen height below;
		46% of screen height above
	Vertical (when floor-mounted) --
		46% of screen height below;
		63% of screen height above
Lamp:	250 Watts
Estimated Lamp Life:	2000 hours
Source Inputs:	(1) Composite; (1) S-Video; (2) RCA Component (YPbPr); (1)
	VGA; (1) DVI with HDCP
Control Options:	-	Discrete infrared remote
	-	Serial commands via RS-232
RS-232 Communication	9600 bps, no parity, 8 data bits, 1 stop bit, no flow control
Parameters:

Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 57