TAB | TAB | TAB 6Italiano | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
REFERENCE
System maintenance
Changing the remote control batteries is the only regular maintenance required.
3.Slide the battery compartment cover back into place.
However, switches inside the remote battery case can be changed. Similar changes may be required for any additional remotes purchased for use in other rooms.
Figure 17 Installing the remote control batteries
Note: For further information on switch settings refer to “Changing remote control switch settings” on page 51.
Replacing the remote control batteries
Replace all four batteries when the remote control stops operating or its range seems reduced. Alkaline batteries are recommended.
1.Slide open the battery compartment on the back of the remote (Figure 17).
2.Insert four AAA or
AAA batteries (4)
Battery
compartment
cover
Battery
compartment
50