TAB | TAB | TAB 6Italiano | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
REFERENCE
Problem | What to do |
|
|
System turns on by itself | • Change the house code setting to prevent signals from conflicting with another nearby |
or behaves erratically | Lifestyle® system. (See “Changing remote control switch settings” on page 51.) |
|
|
Radio does not work | • Make sure antennas are connected properly. |
| • Move AM antenna at least 20 inches (50 cm) from the media center, display module, and |
| Acoustimass® module. |
| • Adjust antenna position to improve reception. |
| • Make sure the AM antenna is in an upright position. |
| • Move antennas farther from media center, display module, TV, or other electronic equipment. |
| • Select another station. You may be in an area of weak signal coverage for some stations. |
|
|
FM sound is distorted | • Adjust antenna position to reduce interference. |
|
|
FM sound is noisy | • Weak FM stations will produce static in the surround speakers. Select the |
in surround mode | mode in the Settings menu to minimize noise. |
|
|
Sound is distorted | • Make sure speaker cables are not damaged and the connections are secure. |
| • Reduce the output level from any external components connected to the media center. |
|
|
No sound from TV, DVD, | • Check the connections. |
VCR, CBL·SAT, or AUX | • Make sure that component is turned on. |
| • Refer to the component owner’s manual. |
|
|
No video on screen, | • Check the TV video input selection. Make sure it is correct for the video source. |
though the TV audio |
|
functions |
|
|
|
58
