TAB | TAB | TAB 6Italiano | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
OPERATION
Controlling a cable or satellite box
Once your cable or satellite box is connected to your Lifestyle® system, you can set up the remote as the single point of control for your subscription service.
Programming the Bose® remote to control the cable or satellite box
Setting up the remote to control the cable or satellite box involves selecting the correct cable or satellite box code.
1.Turn on the TV.
On the TV, select the video input that is connected to the Lifestyle® system.
2.Turn on the cable or satellite box.
3.To display the Lifestyle® system menu on the TV, press System. (See “The remote control” on page 23 for information on operating the remote.)
4.To select the Setup tab, move right and select 
, then press ENTER.
5.Move down to CBL•SAT Device and press
ENTER.
6.Select the correct device type from the list and press ENTER.
If you are unsure of the device type, see the owner’s manual for that device.
7.Move down to CBL•SAT Brand and press ENTER.
8.Select the brand of your device from the list and press ENTER.
9.Move down to CBL•SAT Code and press ENTER.
10.Select the first code in the list.
11.On the Lifestyle® remote, press the
•If the device turns off, you have chosen the correct code.
•If the device does not turn off, select the next code and press
Continue selecting codes until you find one that works.
12.When you have a working code, enter it below, then press ENTER.
13.To exit the system menu, press Exit.
32
