To use IR emitters with two or more devices

English

TAB 2

TAB 3

TAB

TAB

TAB 6

TAB

TAB

INSTALLATION

To use IR emitters with two or more devices

Figure 15 IR emitters positioned on device front panel

1.Plug the IR emitter extender connector into the Lifestyle® media center.

2.Plug the IR emitter cord connector (or additional

extenders) into the IR emitter extender.

3.Place each emitter so that the flat side is against

the front panel of each device.

4. Using the supplied adhesive pads, attach the emitters to the devices.

Note: You can use up to four IR emitters with the system.

If you need additional IR emitter extenders, contact Bose® Customer Service. Refer to the address sheet included in the carton.

21

Page 25
Image 25
Bose Lifestyle V-Class manual To use IR emitters with two or more devices, English