TAB | TAB | TAB 6Italiano | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
INSTALLATION
3.Using the remote control that came with your TV, turn on your TV.
4.Using the Lifestyle® remote control, press System.
5.To move right to the Setup 
menu, press the
right arrow 
then press ENTER.
6.Move down to TV Power by pressing the down arrow, then press ENTER.
7.Move up or down to select the proper TV Power option to detect the TV sensor:
•Automatic (for TV models that do not use a
•Euro Connector (for TV models that use a
8.Press ENTER.
Below the highlighted TV Power item is TV Power Status. The value for this item changes from Not Detected to TV On, when the sensor is properly positioned.
Note: It may be helpful to get an assistant for the next step and have one person view the screen, while the other moves the sensor.
9.Hold the sensor against the rear of the TV and slowly move it around until TV Power Status changes from Not Detected to TV On.
10.When the TV Power Status indicates TV On, press Exit to exit the System menu.
This completes sensor activation.
16
