Liebherr HC 1011/1060 HC 1001/1050 121113 7082698 - 00 manual Maintenance, Defrosting with NoFrost

Maintenance

-The IceMaker is connected to the water supply.

-All air was bled from the waterline before starting the icemaker. The icemaker will only work if there is no air in the waterline.

Switching on the IceMaker*

w This ensures that no water or ice remains in the IceMaker.

6 Maintenance

6.1 Defrosting with NoFrost

The NoFrost system defrosts the appliance automatically.

Fridge compartment:

u Pull out the drawer.

Fig. 6

The defrosted water is evaporated by the heat of the compressor. Drops of water on the back wall are a func- tional feature and completely normal.

u Clean the drain opening regularly so that the defrosted

u Press On/Off button Fig. 6 (1) so that the LED Fig. 6 (2) lights up.

u Push in the drawer.

Note

u The IceMaker only produces ice cubes when the drawer is completely closed.

Producing ice cubes*

The production capacity depends on the freezer tempera- ture. The lower the temperature, the more ice cubes can be produced in a certain period.

The production capacity is 90- 100 ice cubes in 24 hours at a freezing temperature of 0 °F (-18 °C).

To have the maximum capacity of approx. 130 ice cubes in 24 hours, activate the SuperFrost Function. Be aware that this increases the energy consumption because the compressor will run constantly.

The ice cubes fall out of the IceMaker into the drawer. When the ice cubes reach a certain height in the drawer, no more ice cubes can be produced. The IceMaker will not fill the drawer to the top.

If large quantities of ice cubes are required, the complete IceMaker drawer can be swapped with the neighboring drawer. When you close the drawer, the IceMaker auto- matically restarts production.

When the IceMaker is switched on for the first time, it may take up to 24 hours for the first ice cubes to be produced.

Note

Particles may accumulate in the IceMaker or water line the first time the appliance is used or after an extended period out of service.

u To achieve this, do not consume or use the ice cubes that are produced within 24 hours.

Switching off the IceMaker*

If ice cubes are not required, the IceMaker can be switched off independently of the freezer compartment. When the IceMaker is switched off, the drawer of the IceMaker can also be used for freezing and storing food. u Press the On/Off button for about 1 second until the

LED goes out.

u Clean the IceMaker.

water can flow away (see 6.2) .

Freezer compartment:

The moisture condenses on the evaporator and is periodi- cally defrosted and evaporated.

u The appliance does not need to be defrosted manually.

6.2 Cleaning the appliance

WARNING Danger of electric shock.

u Unplug refrigerator or disconnect power.

WARNING

Risk of injury or damage due to hot steam.

Hot steam can cause scalding/burns and damage to surfaces.

u Do not use steam cleaners.

NOTICE

Incorrect cleaning damages the appliance. u Do not use concentrated cleaning agents.

u Do not use steel wool or sponges that scour or scratch. u Do not use caustic or abrasive cleaning materials or those containing sand, chloride, chemicals or acids.

u Do not use chemical solvents.

u Do not damage or remove the rating plate on the inside of the appliance. It is vital for the customer service department.

u Do not pull off, kink or damage any cables or other components.

u Do not let cleaning water get into the drain gutter, the ventilation grille and electrical parts.

u Use soft cleaning cloths and a multi-purpose cleaning agent with a neutral pH value.

u Only use food-compatible cleaning and care agents inside the appliance.

u Empty the appliance.

u Disconnect the power plug.

12 * Depending on model and options