Operation

-To reduce the risk of fire, electric shock, or personal injury, installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction.

-The Power Plug must be easily accessible so that the appliance can be disconnected from the mains quickly in an emergency. It must not be behind the back of the appliance.

-The top of the electric outlet must be located within 82-5/8 in. (2100 mm) from the top of the base in the cabinet.

4.5 Switching on the appliance

Note

u To switch on the entire appliance, only the freezer compartment needs to be switched on.

Switch on the appliance 2 hours before loading with frozen food for the first time.

Do not load frozen foods until the temperature display reads 0 °F (-18 °C).

4.5.1 Switching on the freezer compartment

u Open the door.

u Press On/Off button, freezer compartment Fig. 2 (3).

w The refrigerator compartment temperature display indi- cates the set temperature.

w The temperature display for the freezer compartment will flash until the temperature is cold enough. If the temperature is greater than 32 °F (0 °C), flashing dashes will appear; if the temperature is lower than this, the set temperature will flash on the display.

4.5.2 Switching on the fridge compartment

u Open the door.

u Press Fridge compartment On/Off button Fig. 2 (11). w The interior light comes on when the door is opened. w The temperature display flashes. The fridge compart-

ment is switched on.

5 Operation

5.1 Temperature display unit

The temperature display can be changed from °F to °C.

5.1.1 To change the unit

u Activate setting mode: Press SuperFrost button Fig. 2 (2) for about 5 seconds.

w The SuperFrost button Fig. 2 (2) will flash. w c is displayed in the temperature display.

u Using	Freezer	compartment	Up	button
Fig. 2 (5)/ Freezer compartment Down button
Fig. 2 (4) select °.				button
u To confirm: Briefly press SuperFrost
Fig. 2 (2).		compartment	Up	button
u Using	Freezer
Fig. 2 (5)/ Freezer compartment Down button
Fig. 2 (4) select °F or °C.				button
u To confirm: Briefly press SuperFrost
Fig. 2 (2).		mode: Press	Freezer compartment
u To exit	setting
On/Off button Fig. 2 (3).
-or-
u Wait 5 minutes.

w The temperature is again displayed in the temperature display.

5.2Brightness of the temperature display

You can adapt the brightness of the temperature display to the light conditions in the room in which it is installed.

5.2.1 Setting the brightness

The brightness can be set between h1 (minimum lumi- nosity) and h5 (maximum luminosity).

u To activate setting mode: Press SuperFrost button Fig. 2 (2) for about 5 seconds.

w c is shown on the display.

w The SuperFrost button will flash.

u Press Freezer compartment Up button Fig. 2 (5) or

Freezer compartment Down button Fig. 2 (4) to select h. u To confirm: Briefly press SuperFrost button Fig. 2 (2). u To set the display brighter: Press Freezer

compartment Up button Fig. 2 (5).

u To set the display darker: Press Freezer compartment Down button Fig. 2 (4).

u To confirm: Press SuperFrost button Fig. 2 (2). w The brightness is set to the new value.

u To deactivate setting mode: Press Freezer compart- ment On/Off button Fig. 2 (3).

-or-

u Wait 5 minutes.