Using the Remote Control
Face the remote control towards the player front face IR mark
(remote control signal receiver). Operation angle: About 30 degrees in each the directions from
the front of the IR mark.
Connection Diagram
Refer to the connection diagram for the proper connections.
You can make connections shown as below. Please ask a qualified technician for assistance on any other connections.
1.On a towel or soft cloth, gently place the monitor unit "face down" on a stable work surface.
2.Locate the pigtail with the DIN connector.
3.Connect the DIN connector to the interface cable provided. 4.Connect the RED wire to the positive (+) battery terminal. 5.Connect the BLACK wire to a chassis electrical ground point. 6.Connect the cable with RED RCA jack to Audio Input and Yellow
RCA jack to Video Input Sources for your Video Program material. 7.In case of Video output, connect an RCA cable on the interface
cable box.
9
