Grizzly G1183, G1276 instruction manual Extension Cords, Wiring Diagram

Extension Cords Wiring Diagram

If you find it necessary to use an extension cord with the Model G1183/1276, make sure the cord is rated Hard Service (grade S) or better. Refer to the chart in the standard safety instructions to determine the minimum gauge for the extension cord. The extension cord must also contain a ground wire and plug pin. Always repair or replace extension cords when they become worn or damaged.

Your G1183/1276 machine comes pre-wired for 110 volt operation. A wiring diagram is provided at the back of this manual should it be necessary to repair or revise the wiring. Always utilize a qualified electrician when doing any electrical work on this equipment.

We have covered some basic electrical requirements for the safe operation of your Sander. These requirements are not neces- sarily comprehensive. You must be sure that your particular electrical configuration complies with local and state codes. Ensure compliance by checking with your local municipality or a licensed electrician.

-6- G1183/1276 Combination Sander