ENGLISH

Connecting to a home network (LAN)

This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet radio.

You can update by downloading the latest firmware from the Marantz website.

See “Setting the network [Network]” (vpage 30) on the menu for more information on network setting.

Cables used for connections

Cable (sold separately)

Ethernet cable

Required system

nBroadband internet connection

nModem

Device that connects to the broadband circuit and conducts communications on the Internet.

A type that is integrated with a router is also available.

nRouter

When using this unit, we recommend you use a router equipped with the following functions:

Built-in DHCP server

This function automatically assigns IP addresses on the LAN.

Connecting an iPod

Cables used for connections

Audio cable (sold separately)

iPod cable

iPod

Internet

Router

Computer

Modem

 

 

 

To WAN side

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To LAN port

 

 

 

LAN port/

 

 

 

To LAN port

 

 

 

 

 

 

 

 

 

 

 

 

 

Ethernet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

connector

Built-in 100BASE-TX switch

When connecting multiple devices, we recommend a switching

hub with a speed of 100 Mbps or greater.

nEthernet cable (CAT-5 or greater recommended)

Use only shielded STP or ScTP LAN cable which is available at retailer.

Some flat type Ethernet cables are easily affected by noise. We recommend using a normal type cable.

If you have an Internet provider contract for a line on which network settings are made manually, make the settings at “Network connecting (DHCP=Off)” (vpage 30).

With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically.

When using this unit with the broadband router’s DHCP function enabled, this unit automatically performs the IP address setting and other settings.

When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at “Network connecting (DHCP=Off)” (vpage 30).

When setting manually, check the setting contents with the network administrator.

NOTE

To connect an iPod to this unit, use the iPod cable supplied with the iPod.

nSupported iPod models

For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop.

A contract with an ISP is required to connect to the Internet.

No additional contract is needed if you already have a broadband connection to the Internet.

The types of routers that can be used depend on the ISP. Contact an ISP or a computer shop for details.

Marantz assumes no responsibility whatsoever for any communication errors or troubles resulting from customer’s network environment or connected devices.

This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE.

Do not connect an NETWORK connector directly to the LAN port/ Ethernet connector on your computer.

8

Page 12
Image 12
Marantz M-CR603 Connecting an iPod, Required system, NBroadband internet connection Modem, Router, NSupported iPod models