ENGLISH

Basic operations

Getting

Symbols used to indicate buttons in this guide

Button located on both the main unit and the remote control

BUTTON

Button only on the main unit <BUTTON>

Button only on the remote control [BUTTON]

ON/STANDBY

ON/STANDBY

This section provides information on basic operations such as settings and playback procedures.

For other operations, see the sections below.

nSetting the timer [Timer] (vpage 28) n Setting the others [Other] (vpage 32)

Preparations

Turning the power on

Press ON/STANDBY.

NOTE

Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time, either press ON/STANDBY to turn off the power, or unplug the power cord from the power outlet.

Be sure to stop playback before turning the power off.

nCompletely turning off the power

Setting the current time (Auto Adjust) (12-Hour Display)

When the unit is connected to the Internet, the current time is set automatically.

The default Time Zone setting of this unit is the Eastern Standard Time zone.

To change the Time Zone and Summer Time, see “Adjusting the clock automatically [Clock]” (vpage 29).

When the unit is not connected to the Internet, set the current time manually. See “Setting the current time (Manual Adjust) (12-Hour Display)” (vpage 29).

Started Connections Basic Operations Advanced Operations Information

Unplug the power cord from the wall outlet.

Note that the time setting is cleared when the power cord is unplugged from the outlet.

The settings made for the various functions may be cleared if the power cord is left unplugged from a power outlet for an extended period of time.

Turning the power off

Press ON/STANDBY.

NOTE

• Be sure to stop playback before turning the power off.

Explanation terms Troubleshooting Specifications Index

11

Page 15
Image 15
Marantz M-CR603 Basic operations, Preparations, Turning the power on, Setting the current time Auto Adjust 12-Hour Display