ENGLISH
Getting started
Thank you for purchasing this Marantz product. To ensure proper operation, please read this user guide carefully before using the product.
After reading the guide, be sure to keep it for future reference.
Accessories
Check that the following parts are supplied with the product.
q Remote control | 1 | |
w R03/AAA batteries | 2 | |
e AC Power cord (Cord length: Approx. 6.6 ft / 2 m) | .................. 1 | |
r AM loop antenna | 1 | |
t FM indoor antenna | 1 | |
y iPod stand | 1 | |
u User guide | 1 | |
i Warranty card (U.S.A.) | 1 | |
o Warranty card (Canada) | 1 | |
q | e | r |
t y
Main features
High quality & high power digital amplifier.
DLNA ver. 1.5 supported for Audio Network.
Internet radio by vTuner.
USB input “Made for iPod” and “Made for iPhone”.
3Lines OELD (Organic Electroluminescence Display).
Stylish & compact aluminum cabinet.
Cautions on handling
•Before turning the power switch on
Check once again that all connections are correct and that there are no problems with the connection cables.
•Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the power cord from the power outlet.
•Proper ventilation
If the unit is left in a room full of smoke from cigarettes, etc., for long periods of time, the surface of the optical pickup may get dirty, preventing it from receiving signals properly.
•About condensation
If there is a major difference in temperature between the inside of the unit and its surroundings, condensation may form on parts inside the unit, causing it to fail to operate properly.
If this happens, let the unit sit for an hour or two with the power turned off and wait until there is little difference in temperature before using the unit.
•Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that occurs, move the mobile phone away from the unit when it is in use.
•Moving the unit
Turn off the power and unplug the power cord from the power outlet. Next, disconnect the cables connected to other system units before moving the unit.
About this guide
nOperation buttons
The operations described in this guide are based mainly on remote control operation.
nSymbols
vThis symbol indicates a reference page on which related information is described.
This symbol indicates a supplementary information and tips for operations.
NOTE | This symbol indicates points to remember operations | |
or function limitations. | ||
|
nIllustrations
Note that the illustrations in these instructions may differ from the actual unit for explanation purposes.
2
