GRhapsodyH
Symptom | Cause | Countermeasure | Page |
Cannot login to | • Login information is incorrect. | • Check if the Username for | 23 |
Rhapsody. |
| Rhapsody has been properly |
|
(“Incorrect |
| entered. |
|
Username or |
| (Password is not displayed.) |
|
Password” is |
| www.rhapsody.com/marantz |
|
displayed.) |
|
|
|
GNapsterH
Symptom | Cause | Countermeasure | Page |
Cannot login | • An error occurred during login | • Enter the correct username and | – |
to Napster. | verification. | password to try to login again. |
|
(“Subscription | • If a nonsubscriber user accesses |
|
|
required” is | it. Or when the listening |
|
|
displayed.) | limitation exceeds it. |
|
|
Cannot login | • A wrong username or password | • Enter the correct username and | – |
to Napster. | was entered at the login | password to try to login again. |
|
(“Incorrect | verification. | • Check if the Username for | – |
Username or |
| Napster has been properly |
|
Password” is |
| entered. |
|
displayed.) |
| (Password is not displayed.) |
|
|
| http://www.napster.com/ |
|
|
| choose/index_default.html |
|
GM-XPortH
Symptom | Cause | Countermeasure | Page |
No sound. | • Pairing for Bluetooth | • Perform pairing for Bluetooth | – |
| communication has not been | (wireless) communication again. |
|
| properly completed. |
|
|
The sound is | • There is a device, such as a | • Move the unit or Bluetooth | – |
distorted or | wireless LAN or microwave, | device from where it has been |
|
breaks up. | that uses radio waves in the | installed. |
|
| same frequency band (2.4 GHz) |
|
|
| as this unit. |
|
|
Cannot operate | • AVRCP commands are not | • Consult the user guide of the | – |
Bluetooth device. | supported. | Bluetooth device you are using |
|
|
| to find out whether the device |
|
|
| supports AVRCP commands. |
|
ENGLISH
Specifications
n Audio section
Rated output | 40 W + 40 W |
(1 kHz, total harmonic distortion 0.7 %, 8 Ω) | |
(1 kHz, total harmonic distortion 0.7 %, 6 Ω) | 50 W + 50 W |
Effective maximum output | 50 W + 50 W |
(1 kHz, total harmonic distortion 10 %, 8 Ω) | |
(1 kHz, total harmonic distortion 10 %, 6 Ω) | 60 W + 60 W |
Input sensitivity/impedance |
|
AUX1 | 110 mV/24 kΩ |
AUX2, AUX3 | 200 mV/32 kΩ |
Frequency response (5 W, 8 Ω) |
|
AUX input | 5 Hz to 20 kHz (±3 dB) |
Total harmonic distortion (1 kHz, 5 W, 8 Ω) |
|
AUX input | 0.05 % |
S/N ratio (10 W, 8 Ω, |
|
AUX input | 86 dB |
n Tuner section
• FM tuner |
|
Range of receivable frequencies | 87.5 to 107.9 MHz |
S/N ratio (mono) | 65 dB |
Sensitivity (S/N 30 dB) | 9 dBμV (IHF) |
• AM tuner |
|
Range of receivable frequencies | 520 to 1710 kHz |
S/N ratio | 40 dB |
Sensitivity (S/N 20 dB) | 55 dBμV/m |
n CD section
• Audio performance |
|
S/N ratio (1 kHz) | 100 dB |
Dynamic range (1 kHz) | 100 dB |
Total harmonic distortion (1 kHz) | 0.01 % |
n Clock section
Clock methodWithin 1 – 2 minutes per month
n General
Power supply voltage/frequency | AC 120 V, 60 Hz |
Power consumption | 50 W |
Power consumption in standby mode | 0.4 W |
External dimensions (width x height x depth) | 280 (W) x 111 (H) x 302 (D) mm |
Weight | 4.3 kg (9 lbs 7.7 oz) |
• For purposes of improvement, specifications and design are subject to change without notice.
Getting Started Connections Basic Operations Advanced Operations Information Explanation terms Troubleshooting Specifications Index
45
