Marantz M-CR603 manual Remote control connection, Setting the remote control, RX101

			The wireless receiver connection
	Symbols used to indicate buttons in this guide
Button located on both the main unit and the remote control			By connecting a wireless receiver RX101 (sold separately) to this unit,
		BUTTON	you can receive and playback audio signals from other devices using
Button only on the main unit		<BUTTON>	the Bluetooth Communication Function.
Button only on the remote control		[BUTTON]	• Use a Bluetooth device that is A2DP compatible.
			• You can also use wireless receiver RX101 as an external IR receiver.
o/p u/i <ENTER>			• For instructions on the wireless receiver settings, refer to the
			RX101’s operating instructions.
			Wireless receiver
				RX101

<INPUT>

Bluetooth device (A2DP Compatibility)

Remote control unit

When you connect RX101 to M-XPort on this unit, the function switches to M-XPort.

ENGLISH

Remote control connection

The unit can be controlled using the remote sensor of RX101 connected to the unit. Be sure to set “IR=Disable” when controlling in this way.

NOTE

When making this remote control connection, be sure to set the IR switch of RX101 that is connected to the unit, to ON.

Setting the remote control

1Press <INPUT> and op to select to “ ”, or press

[MENU].

Turns on the Menu settings mode and the Menu appears on the display. (vpage 26 “Menu map”)

2Use ui to select “Other”-“IR Setting”-“Disable”, then press [ENTER/MEMO], <ENTER> or p.

To restore original settings, repeat steps 1 and 2, select “Enable” and press <ENTER>.

NOTE

The unit cannot be controlled using the remote controller while “Disable” is set.

Getting Started Connections Basic Operations Advanced Operations Information Explanation terms Troubleshooting

[MENU]	[ENTER/MEMO]
u
o	p
i

Specifications Index

27