Other functions
Inputting characters
You can change the names as desired using the “Preset Name” (vpage 16), “Napster Account” (vpage 21), “Pandora account” (vpage 22), “Rhapsody account” (vpage 23),andcharacter inputfor the network functions.
For inputting characters, there are two methods, as shown below.
Method | Operations |
•Operating with the remote control unit.
Using the number • Multiple characters are assigned to
buttons | a button, and each time the button is |
| pressed, a character is switched. |
| • Operating with the remote control unit |
Using the cursor | or the main unit. |
buttons | • Use uio p and [ENTER/MEMO] or |
| <ENTER> to input characters. |
nDisplay of an input screen
GPreset nameH
P03
Cursor
select 
move
GAccount inputH
[Username]
select 
: enter
Using the number buttons
1Display the screen for inputting characters.
2Place the cursor at the character to be changed with o p and press [NUMBER] (0 – 9) until the desired
character is displayed.
• The types of characters that can be input are as shown below.
•The input character type can be switched by pressing [MODE] while the display name is being changed.
•For entering the characters assigned to one number button continuously, press pto move the cursor to the right after entering a character then enter the next character.
•For entering characters assigned to separate buttons, press the number button continuously. The cursor automatically moves to the next position, and the entered character is registered.
3Repeat step 2 to change the name then press [ENTER/ MEMO] or <ENTER> to register it.
Example: For changing characters from “POPS” to “ROCK”
q Place the cursor at “P”. | P | OPS | |||
w Press | seven times. |
|
|
|
|
| R | OPS | |||
|
|
| |||
“P” changes to “R”.
ePress p twice.
“R” is automatically registered, and the cursor | RO | P | S | |||||||
|
|
|
| |||||||
placed “P”. |
|
|
|
|
|
|
|
|
| |
r Press | six times. |
|
|
|
|
|
|
|
| |
RO | C | S | ||||||||
“P” changes to “C”. | ||||||||||
|
|
|
|
|
|
|
| |||
t Press p. |
|
|
|
|
|
|
|
|
| |
| ROC | S |
| |||||||
“C” is registered and the cursor placed “S”. |
| |||||||||
|
|
|
|
|
|
|
| |||
y Press | five times. | ROC |
|
| ||||||
K | ||||||||||
“S” changes to “K”. |
|
|
|
|
|
|
|
| ||
uPress [ENTER/MEMO] or <ENTER> to register the input name.
Using the cursor buttons
1Display the screen for inputting characters.
2Use o p to set the cursor to the character you want to change.
3Use ui to change the character.
ENGLISH
•The input character type can be switched by pressing [MODE] while the display name is being changed.
nOther buttons
•Press 8 to delete the character.
•Press 9 to insert a space.
4Repeat steps 2 and 3 to change the name then press
[ENTER/MEMO] or <ENTER> to register it.
Auto power on
When the power is in standby, the power turns on when any of the buttons below other than ON/STANDBY is operated, and the respective operation is performed.
•<5>............... The disc tray opens.
•13............... Playback of the “DISC” or “iPod/USB” starts.
•[TUNER] ........ Playback of the tuner starts.
•[DISC]............ The input source switches to “DISC” and the disc starts playing.
•[iPod/USB] .... The input source switches to “iPod/USB” and the USB starts playing.
Last function memory
This stores the settings as they were immediately before going into the standby mode.
When the power is turned back on, the settings are restored to as they were immediately before going into the standby mode.
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
1Unplug the power cord.
2Plug the power cord into a power outlet while pressing <VOLUME d> and <VOLUME f> simultaneously.
“Initialized” is displayed.
Getting Started Connections Basic Operations Advanced Operations Information Explanation terms Troubleshooting Specifications Index
1 . @ - _ / : ˜ a b c A B C 2 d e f D E F 3 g h i G H I 4 j k l J K L 5
m n o M N O 6
p q r s P Q R S 7
t u v T U V 8
w x y z W X Y Z 9
0 (Space) ! “ # $ % & ‘ ( ) z + , ; < = > ? [ \ ] ^ ` { }
• The types of characters that can be input are as shown below.
GUpper case charactersH
ABCDEFGHIJKLMNOPQRSTUVWXYZ GLower case charactersH abcdefghijklmnopqrstuvwxyz GSymbolsH ! “ # $ % & ‘ ( ) z + ,
= > ? @ [ \ ] ^ _ ` { }
GNumbersH 0123456789 (Space) ˜
If “Initialized” does not display in step 2, start over from step 1.
35
