Canon LV-S4 manual Screen Size Adjustment

Computer Input

Screen Size Adjustment

This projector has a picture screen resize function, which allows you to customize the image size.

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 buttons to move the red frame
	pointer to the Screen Menu icon.
2	Press the Point d button and move the red frame pointer to
	the function that you want to select and then press the OK

button.

Normal

Provide image to fit screen size.

True

Provide image in its original size. When the original image size is larger than the screen size (800 x 600), this projector enters “Digital zoom +” mode automatically.

Wide

Provide image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.

Digital Zoom +

When the Digital Zoom + is selected, the On-Screen Menu disappears and the message “D. Zoom +” is displayed. Press the OK button to expand the image size. And press the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

A projected image can be also expanded by pressing the D.ZOOM

▲button on the remote control unit.

Screen Menu

Screen Menu icon

Move the red frame to the function and press the OK button.

Remote Control Unit

	POINT buttons
MENU VOL-	VOL+
	OK button

KEYSTONE IMAGE NO SHOW

Digital Zoom –

When the Digital Zoom – is selected, the On-Screen Menu disappears and the message “D. Zoom –” is displayed. Press the OK button to compress the image size.

A projected image can be also compressed by pressing the D.ZOOM ▼ button on the remote control unit.

To exit the Digital Zoom +/– mode, press any button except the D.ZOOM ▲▼, OK, and Point button.

To return to the previous screen before adjusting the screen size, select Screen size from the Screen Size Adjustment or Input source from the Input Source Selection (p24) again, or adjust the screen size with the D.ZOOM or the OK button.

✔Note:

•This Screen Menu cannot be operated when “720p(HDTV)”, “1035i (HDTV)”, or “1080i (HDTV)” is selected in the Computer System Menu (p25).

•The True and Digital Zoom +/– cannot be selected when “480i”, “575i”, “480p”, or “575p” is selected in the Computer System Menu (p25).

•This projector cannot display any resolution higher than 1280 x 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting to the projector.

•The image data in other than SVGA (800 x 600) is modified to fit the screen size in initial mode.

•The panning function may not operate properly if the computer system prepared in the PC Adjustment Menu is used.

D.ZOOM ebutton

D.ZOOM FREEZE AUTO PC P-TIMER

D.ZOOM dbutton

MUTE

Computer Input

31