9
Part Names and Functions
A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the RESET
button with a pen, which will shut down and restart the unit. Do not use the
RESET function excessively.
Rear Terminal
wAUDIO IN (Stereo)
Connect the audio output from computer or video
equipment connected to qor yto this jack. (p15, 16)
tMONITOR OUT
This terminal outputs the signal coming from
COMPUTER / S-VIDEO / COMPONENT IN terminal.
(This terminal cannot output RGB(Scart) signal from
COMPUTER / S-VIDEO / COMPONENT IN terminal.)
(p15)
yCOMPUTER / S-VIDEO / COMPONENT IN
Connect S-video output, RGB Scart 21-pin video output,
component video output or computer output to this
connector. (p15,16)
eAUDIO OUT(VARIABLE)
Connect an external audio amplifier to this jack.
(p15, 16)
This terminal outputs sound from AUDIO IN terminal.

Part Names and Functions

✽

qVIDEO
Connect the composite video output from video
equipment to VIDEO jack. (p16)
rSERVICE PORT
This jack is used to service this projector.
✔Note:
• Audio out and Monitor out terminal works only when the projector is under operation and do not work when the projector is in stand-by state or Power
management mode (p41).
COMPUTER/ S-VIDEO/
COMPONENT IN
AUDIO IN
VIDEO SERVICE PORT
RESET
AUDIO OUT
(VARIABLE)
MONITOR OUT
yt
rw eq