Canon LV-S4 manual Remote Control Unit Battery Installation

Part Names and Functions

Remote Control Unit Battery Installation

1	Remove the battery	2	Slide the batteries into	3	Replace the compartment
	compartment lid.		the compartment.		lid.

Two AAA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.

To insure safe operation, please observe the following precautions : ● Use (2) AAA, SUM-4 or LR03 type alkaline batteries.

● Replace two batteries at the same time.

●Do not use a new battery with a used battery.

●Avoid contact with water or liquid.

●Do not expose the remote control unit to moisture or heat.

●Do not drop the remote control unit.

●If the battery has leaked on the remote control unit, carefully wipe the case clean and install new batteries.

●Risk of explosion if battery is replaced by an incorrect type.

●Dispose of used batteries according to the instructions.

12