Setting
Fan
This function provides you the following alternatives in the cooling fans' operation after turning off the projector. (p18)
L1 . . . . . . . .normal operation. Cooling the projector for 90 seconds after turning off the projector.
L2 . . . . . .slower operation than the normal (L1) , but takes longer to cool down the projector. Cooling the projector for 120 seconds after turning off the projector.
Lamp counter reset
This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 49 for operation.
Factory default
This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock and the lamp counter to the factory default settings.
Fan
Factory default
Select Factory default and this box appears. Select [Yes] , and the next box appears.
Select [Yes] to activate it.
44
