Computer Input
Display area
Press the OK button to display the Display area dialog box. Select the resolution at the Display area dialog box.
Display area H
Adjust the horizontal area displayed by this projector. Press the Point 7 8 buttons to decrease/increase the value and then press the OK button.
Display area V
Adjust the vertical area displayed by this projector. Press the Point 7 8 buttons to decrease/increase the value and then press the OK button.
Full screen
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Reset
To reset the adjusted data, select Reset and press the OK button. The confirmation box will appear and then select [Yes]. All adjustments return to their previous figures.
Mode free
To clear adjusted data previously set, move the red frame pointer to the Mode free icon and then press the OK button. Move the red arrow pointer to the Mode that you want to clear and then press the OK button.
Store
To store adjusted data, move the red frame pointer to the Store icon and then press the OK button. Move the red arrow pointer to any of Mode 1 to 5 in which you want to store and then press the OK button.
Quit
Exit the PC Adjustment Menu.
✔Note:
•Auto PC Adj., Display area, Display area (H/V), and Full screen cannot be selected when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, or “1080i” is selected in the Computer System Menu (p25).
Press the OK button at the Display area icon and the Display area dialog box appears.
Display area
To store adjusted data
This Mode has parameters being stored.
Vacant Mode | Show values of “Total |
| dots,” “Horizontal,” |
| “Vertical,” “Display area |
| H,” and “Display area V.” |
To clear adjusted data
Close this dialog box.
28
