Canon LV-S4 manual Video Input, Component, RGB Scart

Video Input

Input Source Selection

Direct Operation

Select either Video or Computer by pressing the INPUT button on the top control or VIDEO or COMPUTER button on the remote control unit.

Before using these buttons, correct input source should be selected through menu operation as described below.

Top Control

VOL	MENU INPUT
+

Remote Control Unit

INPUTPOWER

COMPUTER VIDEO

MENU VOL- VOL+

INPUT button

Computer

Video

COMPUTER button

VIDEO button

Menu Operation

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 buttons to move the red frame
	pointer to the Input Menu icon.
2	Press the Point d button to move the red arrow pointer to
	Video or Computer and then press the OK button. The
	Source Select Menu will appear. When you select Video,
	video input is selected. When you select Computer, move
	the pointer to the correct input source and then press the OK
	button.
		When the input source is connected to the
S-Video
		COMPUTER / S-VIDEO / COMPONENT IN with
		a S-Video-VGA Cable, select S-Video.
		When the input source is coming from video
Component
		equipment connected to the COMPUTER / S-
		VIDEO / COMPONENT IN with a Component-
		VGA Cable, select Component.
		When the input source is coming from video
RGB (Scart)
		equipment connected to the COMPUTER / S-
		VIDEO / COMPONENT IN with a Scart-VGA
		Cable, select RGB (Scart).

✔Note:

•S-Video-VGA Cable, Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 57 for order.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer and press the OK button.

Computer

Source Select Menu

Move the pointer to S-Video, Component or RGB (Scart) and press the OK button.

32