Canon LV-S4 manual Basic Operation, Turning On the Projector, Enter a PIN code, What is PIN code?

Basic Operation

Turning On the Projector

1	Complete peripheral connections (with a computer, VCR,
	etc.) before turning on the projector.
2	Connect the projector's AC power cord into the AC outlet.
	The POWER indicator blinks red in a moment and emits red
	light.
3	Press the POWER button on the top control or on the
	remote control unit. The POWER indicator turns green
	lighting and the cooling fans start to operate. The
	preparation display appears on the screen and the count
	down starts.
4	After the count-down, the image level that was selected last
	and the Lamp mode status icon (see page 41) appear on the

screen.

✔Note:

16

The preparation display disappears after 30 seconds.

Selected Image Level and Lamp Mode

Image Level

Lamp mode

(See page 41 for Lamp mode.)

•If the projector is locked with a PIN code, the PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.

•When the On start function is on, this projector is turned on automatically by connecting the AC power cord to an AC outlet. (See page 41 for the On start function.)

Enter a PIN code

Select a number by pressing the Point 7 8 buttons and fix the number with the OK button. The number will change to "✳". If you fixed an incorrect number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number again. Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the OK button so that you can start to operate the projector.

If you entered an incorrect PIN code, "PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.

PIN code Input Dialog Box

Pointer

After the OK icon disappears, you can operate the projector.

Basic Operation

What is PIN code?

PIN code is a security code using Personal Identification Number that allows the person who knows it to operate the projector. Setting the PIN code prevents others except the specific users from operating the projector.

A PIN code consists of a four-digit number. Refer to the PIN code lock function in Setting on page 43 for locking operation of the projector with your PIN code.

17