Computer Input

Auto PC Adjustment

The Auto PC Adj. function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. The Auto PC Adj. function can be operated as follows.

Direct Operation

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control unit.

Remote Control Unit

KEYSTONE IMAGE NO SHOW

D.ZOOM FREEZE AUTO PC P-TIMER

AUTO PC button

MUTE

Menu Operation

PC Adjust Menu

 

Auto PC Adj.

1

Press the MENU button to display the On-Screen Menu.

 

Press the Point 7 8 buttons to move the red frame pointer

 

to PC Adjustment Menu icon.

2

Press the Point d button to move the red frame pointer to

 

Auto PC Adj. icon and then press the OK button twice.

To store adjustment parameters

Adjustment parameters from Auto PC Adj. can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in the Computer System Menu (p25). See “Store” on page 28.

PC Adjust Menu icon

Move the red frame pointer to the Auto PC Adj. icon and press the OK button.

"Wait a moment!" message appears while Auto PC adjustment is in process.

Note:

Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adj. function. When the image is not provided properly with this operation, manual adjustments are required. (p27, 28)

The Auto PC Adj. cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the Computer System Selection. (p25)

26

Page 26
Image 26
Canon LV-S4 manual Auto PC Adjustment, PC Adjust Menu, To store adjustment parameters