Canon LV-S4 manual Computer System Selection, Selecting Computer System Manually, Auto, Mode

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector is shown on page 55 )

✔Note:

• The projector may display one of the following messages.

Auto	When the projector cannot recognize connected
	signal conforming to PC Systems provided in this
	projector, the Auto PC Adj. function works to display
	proper images and the message “Auto” is displayed
	on the PC System Menu icon. When the image is not
	projected properly, manual adjustment is required.
	(p27, 28)

-----There is no signal input from computer. Check the connection of your computer and the projector. (See "Troubleshooting" p50)

Mode 1	User preset system manually adjusted in PC
	Adjustment menu. Adjusted data can be stored in
	Mode 1 - 5. (p27, 28)
	PC system provided in the projector. The projector
SVGA 1
	selects a proper system and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 buttons to move the red frame
	pointer to the PC System Menu icon.
2	Press the Point d button to move the red arrow pointer to
	the system that you want to set, and then press the OK

button.

PC System Menu

The Auto PC Adj. function operates to adjust the projector.

PC System Menu

The PC System Menu icon displays the system being selected.

Systems on this dialog box can be selected.

Custom Mode (1~5) set in the PC Adjustment Menu.

(p27, 28)

Computer Input

25