Vidikron Vision 50 manual Main Menu, Picture Adjust

Operation

Main Menu ➤

Vision Model 50

Picture Adjust

Image Option

Projector Status

Installation

Service

ISF Calibration

Picture Adjust ➤

Picture Adjust

Brightness		30
Contrast	15
Color	31
Tint	15
Sharpness	2
Color Temp.	2
Color Select	NTSC

The Main Menu is the starting point for accessing all projector functions.

(The Service and ISF Calibration menus are hidden and not accessible until you enter a passcode.)

Select Picture Adjust from the Main Menu to calibrate your Vision 50 for optimum picture quality.

To adjust a setting, use the or button to highlight it and use the or button to change the setting. When finished, press EXIT.

The Vision 50 has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that setup and calibration be performed by an ISF certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each input separately.

When you change a picture quality setting, save the change to a preset

Note afterwards. Otherwise, the change will be lost when a different input is selected. (Picture quality settings are saved for each input and resolution separately.) For information about saving settings, refer to Save Settings on page 54.

46 Vidikron Vision 50 Series Owner’s Operating Manual