Vidikron Vision 50 manual Connecting the 12-volt Trigger Output to Other Equipment

Installation

Connecting 12-volt Trigger ➤	If your Vision 50 is equipped with a CineWide with AutoScope system, use the cable supplied
Output to External Theater	with the AutoScope Lens Motor to connect the motor to the 12-volt trigger output as shown
Equipment	in Figure 3-14.

S-VID /

VID-S

3.5-mm mini plug

to AutoScope Lens Motor

Figure 3-14. Connecting the 12-volt Trigger Output to the AutoScope Lens Motor

If your home theater contains a retractable screen, screen mask or other 12-volt trigger-activated equipment, use the cable supplied with the Vision 50 to connect it to the 12-volt trigger output as shown in Figure 3-15.

S-VID /

VID-S

3.5-mm mini plug

to other,
12-volt	Black = Ground (Sleeve)
trigger-activated equipment
	Red = +12V (Tip)
(screen, screen mask etc.)

Figure 3-15. Connecting the 12-volt Trigger Output to Other Equipment

30 Vidikron Vision 50 Series Owner’s Operating Manual