Vidikron Vision 50 manual RS-232 Control System Connection

Installation

Connect a PC or home theater control/automation system (if present) to the RS-232 port on the Vision 50; see Figure 3-13.Use a standard, 4-wire RJ-11 telephone cable, wired straight-through.

For more information about using this connection, refer to Serial Communications on page 67.

S-VID / VID-S

RS-232 Controller Connection

RJ-11 Male

Yellow

Green

1
2	Black
3

4Red

RJ-11 to D-Sub 9-pin Adapter (not included)

Yellow
Green
	5	4	3	2	1
Black	9	8		7	6
Red	D-Sub 9-pin female

RS-232 Adapter Wiring

D-Sub 9-pin female	4-pin RJ-11	Function
2	2	Transmit Data
3	3	Receive Data
5	1, 4	Ground
1, 4, 6, 7, 8, 9	--	Not Connected

Figure 3-13. RS-232 Control System Connection

Vidikron Vision 50 Series Owner’s Operating Manual 29