Specifications
Table 7-1. Vision 50 Specifications (continued)
Brightness and Contrast: | Cinema Standards Measurement System (CSMS) | |
| Specifications | |
| - | Brightness*: 14.7 to 21.5 |
| - | Contrast Ratio*: 195:1 to 218:1 |
| *Variable depending on Aperture Control setting | |
| These measurements are taken from the projector in a controlled, home | |
| theater environment. All measurements are made to ANSI/NAPM | |
| ||
| SpectraColorimeter and Minolta | |
| Essentials test DVD and a 1.3 gain, | |
| calibrated to a color temperature of 6,500K and has a minimum of 150 | |
| hours of usage. | |
| The | |
| movie theaters to express image brightness at the screen surface. The | |
| Society of Motion Picture and Television Engineers (SMPTE) specifies | |
| 16 fL as the target image brightness for | |
| open gate (without film in the projector). More importantly, today | |
| SMPTE specifies 12 fL as the target image brightness in Digital Cinema | |
| theaters. The | |
| screen gain and projector light output. | |
| Home Theater Calibration Specifications | |
| - | Light Output: 449 to 585 ANSI Lumens |
| - | Contrast Ratio*: 195:1 to 218:1 |
| These specifications are obtained by calibrating the projector as | |
| described above for CSMS measurements. | |
|
| |
| - | Light Output: 1225 ANSI Lumens |
| - | Contrast Ratio: 1400:1 to 3000:1 |
| These are typical projector brightness and contrast specifications found | |
| in most companies’ sales literature. Vidikron includes these | |
| measurements in its literature to allow for direct comparison with other | |
| manufacturers’ projectors. These measurements are typically taken at | |
| 9,000K to 13,000K to get expected performance data when the projector | |
| is used in professional, commercial and industrial displays. | |
|
| |
Lamp: | 250 Watts | |
|
| |
Estimated Lamp Life: | 2000 hours | |
|
| |
Video Inputs: | (1) Composite Video, (1) | |
| (BNC connectors), (1) RCA Component Video, (1) HDMI | |
|
|
|
Control Options: | - | Discrete IR remote |
| - | |
| - | Serial commands via |
|
| |
| 9600, 38400 or 115200 bps, no parity, 8 data bits, 1 stop bit, no | |
Parameters: | flow control | |
|
| |
12V Output: | Max. 0.25 Amps, active when Cinema or Cinema Fill Aspect Ratio | |
| is selected (Vision 50/CineWide with AutoScope only) or when | |
| projector is turned on; Tip = +12V; Sleeve = Ground | |
|
| |
Power Requirements: | 100 to 240 VAC | |
|
| |
Operating Environment: | 41°F to 95°F (5°C to 35°C), 20% to 80% humidity | |
| ||
|
| |
Dimensions: | See Figure | |
|
| |
Weight (without lens): | 46.5 lbs. (21.09 kg) | |
72 | Vidikron Vision 50 Series Owner’s Operating Manual |
