Vidikron Vision 50 manual Connections to the Vision, Connector Panel Access, Connecting Source

Installation

Proceed as follows to connect the Vision 50 to your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

To access the connector panel, press the door release button so it pops out. Turn the knob clockwise or counter-clockwise and pull gently on it to open the door.

3.6

Connections to the Vision 50

Connector Panel Access

Connect your video sources to the Vision 50 as shown and described in the sections that	Connecting Source
follow.	Components to the Vision 50
HDMI/DVI Connections: See Figure 3-9.With an HDMI source, use the included
HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable.

Use the HDMI input whenever possible. This ensures the highest video

Tip quality because the signal is carried in the digital domain throughout the entire signal path, from source component output into the projector.

S-VID /

VID-S

HDMI or DVI Source

(DVD Player or HD Set Top Box)

Figure 3-9. HDMI/DVI Source Connections

Vidikron Vision 50 Series Owner’s Operating Manual 25