HP Enterprise CP5525 manual Dest IPv6, Print Results Yes, Ping Results Packets Sent, 00000

Table 3-41	Embedded Jetdirect (continued)
First level	Second level Third level	Fourth level	Fifth level	Values	Description
	Dest IPv4			Range: 0 – 255	Type the IPv4 address.
				Default =
				127.0.0.1
	Dest IPv6			Select from a	Type the IPv6 address.
				provided list.
				Default = : : 1
	Packet Size			Default = 64	Specify the size of each
					packet, in bytes, to be sent to
					the remote host. The minimum
					is 64 (default) and the
					maximum is 2048.
	Timeout			Default = 001	Specify the length of time, in
					seconds, to wait for a response
					from the remote host. The
					default is 1 and the maximum
					is 100.
	Count			Default = 004	Specify the number of ping test
					packets to send for this test.
					Select a value from 0 to 100.
					The default is 4. To configure

the test to run continuously, select 0.

Print Results	Yes
	No*

If the ping test was not set for continuous operation, you can choose to print the test results. Select Yes to print results. If you select No, results are not printed.

Execute	Yes
	No*

Specify whether to initiate the ping test. Select Yes to initiate the test, or No to not run the test.

Ping Results Packets Sent	Default =	Use this item to view the ping
	00000	test status and results using the
		control panel display. You can
		select the following items:
		Shows the number of packets
		(0 - 65535) sent to the remote
		host since the most recent test
		was initiated or completed. The
		default is 0.
Packets	Default =	Shows the number of packets
Received	00000	(0 - 65535) received from the
		remote host since the most
		recent test was initiated or
		completed. The default is 0.

398 Chapter 3 Solve problems ENWW