Hunter Fan Type 3 Models, 45007 warranty could cause improper operation and damage to the

8 • Completing Your Installation With a Bowl Light Fixture (Continued)

8-5. To attach the light kit, connect the upper plug connector from the heat shield assembly to the lower plug connector in the light kit assembly.

Note: Both plug connectors are polarized and will only fit
together one way. Make sure the connectors are properly
aligned before connecting them. Incorrect connection
could cause improper operation and damage to the	Heat Shield
product.
	Assembly

8-6.	Align the keyholes in the light kit assembly with the two
	preinstalled housing assembly screws and turn the light
	kit assembly clockwise until the screws are resting in the
	narrow end of the keyhole slots.	Light Kit
8-7.	Tighten the prinstalled assembly screws and install the
		Assembly
	third assembly screw.	Steps 8-5 – 8-7
8-8.	Install B10 candelabra bulbs (60 Watt Maximum) into	Keyhole Slots
	the sockets.
8-9.	Hold the glass bowl up with the holes in the glass bowl
	aligned with the holes in the metal rods.	Assembly Screw
8-10.	Install the decorative screws into the metal rods to secure
	the glass bowl in place.
		Metal Rod
		Light Bulbs
		(B10
		Candelabra-
		Based,
		60 Watt
		Maximum)
		Decorative
		Screw
	Steps 8-8 – 8-10	Glass Bowl

12

45007-01 • 11/02/07 • Hunter Fan Company