Hunter Fan Type 3 Models warranty 45007-01 11/02/07 Hunter Fan Company

8 • Completing Your Installation With a Bowl Light Fixture

Your Hunter fan comes with an integrated light fixture assembly.

WARNING: Use only the light fixture supplied with this fan model.

8-1. To attach the heat shield assembly, partially install two housing assembly screws into the switch housing mounting plate.

8-2. Feed the upper plug connector through the center opening of the shield.

8-3. Align the keyhole slots in the housing with the assembly screws.

8-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining screw into the housing. Tighten all three screws firmly.

CAUTION: Make sure the heat shield assembly is securely attached to the housing mounting plate. Failure to properly attach and tighten all three assembly screws could result in the heat shield assembly and light fixture falling.

Steps 8-1 – 8-4

Assembly	Heat
Screw
	Shield
	Assembly

11

45007-01 • 11/02/07 • Hunter Fan Company