NEC Complete Specifications for Computer Monitors AS171 and AS191

Specifications

Monitor Specifications			AccuSync AS191 Monitor	Notes
LCD Module		Diagonal:	48.3 cm/19.0 inches	Active matrix, thin film transistor (TFT)
	Viewable Image Size:		48.3 cm/19.0 inches	liquid crystal display (LCD); 0.294 mm dot
Native Resolution (Pixel Count):			1280 x 1024	pitch; 250 cd/m2 white luminance, 900:1
				contrast ratio, typical.
Input Signal	15pin Mini D-sub:		Analog RGB	0.7 Vp-p/75 ohms
			Sync	Separate sync. TTL level (Positive/Negative)
		DVI-D	Digital RGB	DVI(HDCP)
Display Colors		Analog input:	16.7 M	Depends on display card used.
Viewing Angle		Left/Right:	-80°/+80° (CR>10)
		Up/Down:	-80°/+80° (CR>10)
Synchronization Range		Horizontal:	31.5 kHz to 81.1 kHz	Automatically
		Vertical:	56 Hz to 76 Hz	Automatically
Resolutions Supported		Landscape:	720 x 400*1: VGA text	Some systems may not support all
			640 x 480*1 at 60 Hz to 75 Hz	modes listed.
			800 x 600*1 at 56 Hz to 75 Hz
			832 x 624*1 at 75 Hz
			1024 x 768*1 at 60 Hz to 75 Hz
			1152 x 864*1 at 75 Hz
			1152 x 870*1 at 75 Hz
			1280 x 960*1 at 60 Hz to 75 Hz	Recommended resolution is 60 Hz for
			1280 x 1024 at 60 Hz to 75 Hz.....................optimal display performance.
Active Display Area		Horizontal:	376 mm
		Vertical:	301 mm
Power Supply			100 - 240 V ~ 50/60 Hz
Current Rating			0.5 - 0.3 A
Power	Maximun Operation:		24 W
Consumption	Normal Operation:		20 W
Dimensions		Landscape:	412.5 mm (W) x 403.1 mm (H) x 205.1 mm (D)
			16.2 inches (W) x 15.9 inches (H) x 8.1 inches (D)
Weight			4.4 kg (9.7 lbs)
Environmental Considerations
Operating Temperature:			5°C to 35°C/41°F to 95°F
		Humidity:	20% to 80%
		Altitude:	0 to 2,000 m/0 to 6,562 Feet
	Storage Temperature:		-10°C to 60°C/14°F to 140°F
		Humidity:	10% to 85%
		Altitude:	0 to 12,192 m/0 to 40,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

English-12