Controls and functions
Projector
6. BLANK
1
2
3 | 12 |
4 | 11 |
5 | 5 |
6 | 10 |
7 |
|
3 |
|
8 | 9 |
1.Focus ring
Adjusts the focus of the projected image. See
2.Zoom ring
Adjusts the size of the image. See "Fine- tuning the image size and clarity" on page 24 for details.
3.Keystone/Arrow keys ( 
/
Up, 
/
Down)
Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 24 for details.
4.MENU/EXIT
Turns on the
5.Volume/Arrow keys ( 
/ 
Left, 
/
Right)
Adjusts the sound level.
When the
Used to hide the screen picture. See "Hiding the image" on page 35 for details.
7.TEMPerature indicator light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 55 for details.
8.II Power/POWER indicator light Toggles the projector between standby mode and on.See "Starting up the projector" on page 22 and "Shutting down the projector" on page 39 for details. Lights up or flashes when the projector is under operation. See "Indicators" on page 55 for detail.
9.LAMP indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 55 for details.
10.Source
Displays the source selection bar. See "Switching input signal" on page 28 for details.
11.AUTO
Automatically determines the best picture timings for the displayed image. See
12.MODE/ENTER
Selects an available picture setup mode. See "Selecting a picture mode" on page 31 for details.
Activates the selected
10 Introduction
