NETGEAR STM150EW-100NAS, UTM5EW-100NAS Setup Wizard Web Categories to be blocked screen settings

ProSecure Unified Threat Management (UTM) Appliance

Enter the settings as explained in the following table, and then click Next to go the following screen.

Table 10. Setup Wizard Step 7: Web Categories to be blocked screen settings

Setting Description

Blocked Web Categories

Select the Enable Blocking check box to enable blocking of web categories. (By default, this check box is selected.)

Select the check boxes of any web categories that you want to block. Use the action buttons at the top of the section in the following way:

•Allow All. All web categories are allowed.

•Block All. All web categories are blocked.

•Set to Defaults. Blocking and allowing of web categories are returned to their default settings. See Table 41 on page 193 for information about the web categories that are blocked by default. Categories that are preceded by a green square are allowed by default; categories that are preceded by a pink square are blocked by default.

Blocked Categories Scheduled Days

Make one of the following selections:

•Select the All Days radio button to enable content filtering to be active all days of the week.

•Select the Specific Days radio button to enable content filtering to be active on the days that are specified by the check boxes.

Blocked Categories Time of Day

Make one of the following selections:

•Select the All Day radio button to enable content filtering to be active all 24 hours of each selected day.

•Select the Specific Times radio button to enable content filtering to be active during the time that is specified by the Start Time and End Time fields for each day that content filtering is active.

After you have completed the steps in the Setup Wizard, you can change the content-filtering settings by selecting Application Security > HTTP/HTTPS > Content Filtering. The Content Filtering screen lets you specify additional filtering tasks and notification settings. For more information about these settings, see Configure Web Content Filtering on page 218.

Use the Setup Wizard to Provision the UTM in Your Network

61