NETGEAR STM150EW-100NAS Rear Panel UTM5, UTM10, and UTM25, Receptacle, Wireless network module

ProSecure Unified Threat Management (UTM) Appliance

Table 3. LED descriptions UTM9S and UTM25S (continued)

LED	Activity	Description
Right LED	Off	The WAN port is operating at 10 Mbps.
	On (amber)	The WAN port is operating at 100 Mbps.
	On (green)	The WAN port is operating at 1000 Mbps.
Active LED	Off	The WAN port either is not enabled or has no link to the Internet.
	On (green)	The WAN port has a valid Internet connection.
Wireless network module
Module	Off	The module is not enabled.
Status LED
	On (green)	The module is enabled.
Wireless	Off	The wireless access point is not enabled.
Link LED
	On (green)	The wireless access point is enabled in 2.4-GHz operating mode.
	Blinking (green)	There is wireless activity in 2.4-GHz operating mode.
	On (yellow)	The wireless access point is enabled in 5-GHz operating mode.
	Blinking (yellow)	There is wireless activity in 5-GHz operating mode.
xDSL network modules
Module	Off	The module is enabled or has a link to the telephone line.
Status LED
	On (green)	The module either is not enabled or has no link to the telephone line.
Link LED	Off	The xDSL port has no Internet connection.
	On (green)	The xDSL port functions in ADSL mode.
	On (yellow)	The xDSL port functions in VDSL mode.

Rear Panel UTM5, UTM10, and UTM25

The rear panel of the UTM5, UTM10, and UTM25 includes the cable lock receptacle, the console port, the Factory Defaults reset button, and the AC power connection.

Security lock	Console port	Factory Defaults AC power
receptacle		reset button	receptacle

Figure 9. Rear panel of the UTM5, UTM10, and UTM25

Introduction

33